Maintenance Control Position With Remote Control From The Ground Pag - JLG X20JPLUS Operator, Safety, Maintenance And Service Manual

MAINTENANCE
12.3.MAINTENANCE CONTROL POSITION WITH REMOTE CONTROL
FROM THE GROUND
As a control device for maintenance, you can use the remote control in the basket
(or a second remote control optional) connecting it to the appropriate seat on the
machine.
This type of operation is only allowed in case of machine maintenance by quali‐
fied personnel.
Proceed as follows to use this function:
Fig. 152 Kit use remote control from the ground
Fig. 153 Position connector optional second remote
144 Boom Lift Models X20JPLUS
MUX20JP021602
1 If you have not already,
or is not installed on the
machine ask the kit to
use remote control from
the ground at an autho‐
rized service.
2 With the unit off (igni‐
tion key to OFF), con‐
nect the cable of the kit
to the connector located
in the electrical box un‐
der the guard. Now con‐
nect the remote to the
cable service. If the kit is
already installed on the
machine connect direct‐
ly the remote control to
the cable service.