Service Menu On The Remote Control; Input Menu; Language Menù; Errors Menu - JLG X20JPLUS Operator, Safety, Maintenance And Service Manual

SERVICE MENU ON THE REMOTE CONTROL
14.SERVICE MENU ON THE REMOTE CONTROL
A SERVICE button ʺPush buttons (p. 61)ʺ is available on the remote control and
is used to display the status of the machine parameters and as assisting device for
the safety checks to be carried out on the machine, as specified in this manual.
Pressing button 6 accesses a numerical menu, controlled by the number buttons
on the remote control. The meaning of these menus is explained in this manual.
If after reading the manual you still have some doubts, contact the after sales ser‐
vice.
1 INPUT
LANGUAGE
ERRORS
RAMPS
CURRENTS
WORKING HOURS
SETTING
JOYSTICK
ESC
The 4‐5‐7 menu items are not normally used except for setting operations and dia‐
gnosis by qualified personnel.
14.1.INPUT MENU
This displays the signals received by the board from the various sensors fitted on
the machine and from the controls on the remote control. Each screen shows the
status of the input and options to scroll the menu.
14.2.LANGUAGE MENÙ
Allows you to select menu language among those available.
14.3.ERRORS MENU
Indicates correspondence between the double sensors, either (OK) or (FAULT). If
the OK symbol is shown next to the sensor, this means that both elements on the
same sensor are sending congruent information. If the FAULT symbol is shown
next to the sensor, this means that the elements on the same sensor are sending
contradictory information.
192 Boom Lift Models X20JPLUS
MUX20JP021602