Table of Contents
Advertisement
USING THE MACHINE
6
7
8
9
11.1.3.Danger due to the work area
THE MACHINE CAN ONLY WORK ON COMPACT AND LEVEL GROUND.
Always verify that the slope of the ground in the platform positioning area does
not exceed the stabilization max inclination. During the stabilisation phase, use
the spirit level positioned in proximity to the main controls to check that the ma‐
ximum inclination of the coupling with respect to horizontal does not exceed 1°.
Check the route for the presence of persons, holes, overhangs, obstacles, debris
and coverings which may hide holes.
Before entering any high risk areas (refineries, power stations etc.) check ac‐
cessibility with plant safety staff.
11.2.PROCEDURES FOR CORRECT USE
Below find the procedures for use of the platform as declared by the Constructor.
Any use different to that stated below, unless authorised in writing by the Con‐
structor. is prohibited.
84
25‐31
10.8‐13.8
32‐38
13.9‐17.1
39‐46
17.2‐20.7
47‐54
20.8‐24.4
Boom Lift Models X20JPLUS
MUX20JP021602
Strong breeze
waving near
Umbrella use
becomes diffi‐
Near Gale/
Whole trees in
Moderate
motion. Effort
Gale
walk against
Fresh Gale
Twigs broken
Cars veer on
Strong Gale
Light structu‐
Large bran‐
ches in mo‐
tion. Flags
horizontal.
cult.
needed to
the wind.
from trees.
road.
re damage.
Advertisement
Table of Contents
