Clothing And Protective Equipment; Safety Valves And Electrical System Safety Components - JLG X20JPLUS Operator, Safety, Maintenance And Service Manual

TECHNICAL INFORMATIONS
• It is prohibited to make modifications to the machine that could jeopardise
functioning and safety, without previous written authorisation from The Con‐
structor which is not liable for any injury or damage caused by this behaviour.
7.7. CLOTHING AND PROTECTIVE EQUIPMENT
Warning
USE THE TYPE‐APPROVED AND CERTIFIED SAFETY HARNESSES. BEFORE
WORKING AT A HEIGHT, MAKE SURE THAT THE SAFETY HARNESSES
ARE CORRECTLY FASTENED AND CONNECTED TO THE ANCHORAGE
POINTS ON THE BASKET.
THE USE OF HARNESSES IS COMPULSORY IN ACCORDANCE WITH LO‐
CAL LEGISLATION IN EACH INDIVIDUAL COUNTRY. IN COUNTRIES
WHERE THE LAW DOES NOT REQUIRE THE USE OF SUCH SAFETY SY‐
STEMS, THE EMPLOYER AND/OR USER IS RESPONSIBLE FOR CHOOSING
THE SYSTEM TO BE USED.
7.8. SAFETY VALVES AND ELECTRICAL SYSTEM SAFETY COMPONEN‐
TS
It is prohibited to modify and/or tamper with the safety and control valves of
the main hydraulic system and the adjustments of the electric plant. The Con‐
structor is not liable for injury to persons and damage to objects or to the ma‐
chine if the standard calibration of any hydraulic and electric/electronic
component is tampered with.
26
Avoid wearing loose clothing, rings,
watches or anything else that may get
caught in moving parts. When using
the machine or performing maintenan‐
ce, wear a hard hat, glasses, safety fo‐
otwear, gloves and acoustic earmuffs
after making sure these and all other
PPE that the safety manager considers
necessary based on the risk analysis
performed are in perfect working con‐
dition.
Boom Lift Models X20JPLUS
MUX20JP021602