Getting Started - D-Link DPH-80 Manual

Getting Started

Overview
The D-Link DPH-80 is a low cost, simple to use, and extremely versatile IP
phone with the look and feel of a normal PSTN phone.
The D-Link IP Phone can operate under any of the three main Internet telephony
protocols: Media Gateway Control Protocol (MGCP); Session Initiation Protocol
(SIP); and the H.323 protocol. These protocols are used for signaling,
maintaining, and tearing down voice calls. The D-Link IP phone allows voice
data to be carried over the same path used by your computer for the Internet or
Local Area Network (LAN).
The D-Link DPH-80 phone is easy to install and supports plug and play features
of the IP network. Out of the box, your IP phone will work in any of the above-
mentioned three protocol infrastructures with minimal configuration. Advanced,
customized configuration is easily achieved through a web-browser configuration
utility.
D-Link IP phones support remote maintenance, allowing software to be upgraded
remotely for new features and any bug fixes. The DPH-80 supports a unique
remote diagnostic feature to monitor phone functions and performance.
Installation
The following are steps will install and power-on your DPH-80 IP phone:
Connect the RJ-45 Ethernet cable from the DPH-80 to a LAN jack.
Plug the power adapter into the appropriate wall outlet.
Plug the power adapter plug into the power jack.
6