Table of Contents
Advertisement
Using H.323 Protocol
Configuration Main Page
Country Code: This is a drop-down menu. Select the appropriate country.
This field controls the type of tones played by the SIP phone.
Obtain IP address using: If the static option is selected, then a user-
configured IP address, Net Mask, Default gateway, and DNS server
address will be used for the phone. If DHCP is selected, then these values
will be obtained using the DHCP. If the PPPoE is selected, and using the
PPP username and password for authentication, the PPPoE obtains an
IP address for the phone. The default selection is Static-enabled.
PPP user name: This is the user name used for PPP authentication with
the PPP server while obtaining an IP address via PPPoE.
PPP password: This is the password used for PPP authentication with
the PPP server while obtaining an IP address via PPPoE.
Idle Timeout: This is the time interval, in seconds, of session inactivity
after which the PPP session should be terminated. If this is set to 0, then
the session will never be terminated. This field is currently grayed out so
that it can't be modified. This will allow the PPP session to be on
permanently unless the server closes the connection. This field can be
activated later to enable a configuration of the timeout value.
IP Address: This is the IP address of the phone in dot-separated IP
address form. An illegal IP address won't be allowed for this field.
Net Mask: This is the Net Mask of the network to which the IP phone is
connected. It must be in dot-separated form. An illegal IP address mask
won't be allowed for this field.
Default Gateway: This is the default gateway for the IP phone. An illegal
IP address won't be allowed for this field.
DNS server Address: This is the IP address of the DNS server, which
will respond to the DNS queries from the IP phone. It must be in dot-
separated form. An illegal IP address won't be allowed for this field.
66
Advertisement
Table of Contents
