Table of Contents
Advertisement
Using Session Initiated Protocol (SIP)
Configuration Main Page
General Configuration
The items on this page are described below:
Firmware Version : This shows the current firmware version of the IP
phone. It is updated whenever the SIP phone software is updated. It can-
not be modified.
Hardware Version: This shows the current hardware version of the IP
phone. It cannot be modified.
MAC Address: This shows the MAC address of the board in colon-sepa-
rated hex form. By default the value is ff:ff:ff:ff:ff:ff, once this value is modified
it will be grayed out and cannot be changed.
Country Code: This is a drop-down menu. Select the appropriate coun-
try. This field controls the type of tones played by the SIP phone.
38
Advertisement
Table of Contents
