D-Link DPH-80 Manual page 91

Configuration Upload and Download
Configuration Upload
Upload Procedure
Configure the DPH-80 with the above required parameters.
Run the tftp server on the computer (Ex: 10.47.60.252 as above) where
you want to upload the configuration.
Initiate the configuration upload by clicking on the Configuration Upload
link in the main page.
Now you can see the configuration (Ex: upld.txt as above) file in the
computer with the current DPH-80 system configuration.
Configuration Download
Use the following procedure to download a new system configuration from the
configured computer once again using the standard tftp application.
Downloading the Configuration
The DPH-80 system must be configured with the system IP address and
filename of the new configuration parameters. This can be done using the web
interface, by logging in to DPH80/General Configuration/TFTP Configuration.
The download file should be in a specific format understandable by the DPH-80
system. Since it is difficult to manually write the configuration file, to change a
configuration you must initially upload the configurations from theDPH-80, then
change the configurations in the uploaded file, a download that modified con-
figuration file.
TFTP server: This is the system where the tftp server is running, and
where the configurations are stored.
Configuration Download Filename: This is the name of the configura-
tion file from which the configuration parameters will be downloaded. The
filename does not have an extension. The DPH-80 system will automati-
cally include the .txt extension while downloading.
91