Table of Contents
Advertisement
Using Session Initiated Protocol (SIP)
Configuration Main Page
Speaker Gain: This will show the speaker gain in the range of -14 to 14
(units of dB).
Access Settings: The following three key sequences should be unique.
Factory Default: This is the key sequence the user should dial on the
phone to get the phone to use all the default values of the parameters.
After entering this key sequence on the SIP phone it will restore the
parameters to default upon next restart.
Production Key: This is the key sequence the user should dial on the
phone to get to production-test mode. After entering this key sequence,
the SIP phone will start in production-test mode upon next restart. Reboot
after the production test is complete to start functioning in the SIP phone
mode.
TFTP upload: This is the key sequence the user should dial on the phone
to start the TFTP software update. After getting the new image, the phone
will start itself using the new image.
Click on SIP Configuration.
41
Advertisement
Table of Contents
