D-Link DPH-80 Manual page 36

D-link dph-80: user guide

Hide thumbs Also See for DPH-80:

Table of Contents

Using Session Initiated Protocol (SIP)

Configuring the SIP Phone

Once you have the above infrastructure in place, you can power up the SIP

phone. The SIP phone will play a call progress tone and try to register with the

SIP proxy server. This operation will fail since the SIP phone is not configured

properly and it will play error tone. However, the SIP phone is accessible through

an Internet browser for configuration.

The SIP phone IP address is required to access the phone through a browser.

The SIP phone uses factory default values before configuration and the default

IP address is 10.1.1.80 (net mask 255.0.0.0). However, the user can enter an

IP address through the keypad immediately after a factory reset as per the

format *x*y*z*a*#, where the symbols * and # are mandatory.

To access the web interface for the D-Link DPH-80:

Use a JavaScript-enabled Internet browser (Netscape 6.2 or above, IE 5.0 or

above) with the default IP address of the DPH-80 entered in the address box

(http://10.1.1.80).

The following page will appear.

Table of Contents