D-Link DPH-80 Manual page 63

D-link dph-80: user guide

Hide thumbs Also See for DPH-80:

Table of Contents

Using H.323 Protocol

Configuring the H.323 Phone

D-Link H.323 phones supports a feature where you can restart the H.323 phone

with factory defaults. This is useful if you want to configure the H.323 phone

through the browser and you don't have the H.323 phone's IP address. This

feature updates the configurable parameters to default values.

Note: The factory defaults can't be modified after being burned to flash unless

the flash is reprogrammed. Thus the factory should burn the correct MAC ad-

dress to factory defaults. The software will not work if the MAC chip is other than

DL-10022A.

To access the web interface for the D-Link DPH-80:

Use a JavaScript-enabled Internet browser (Netscape 6.2 or above, IE 5.0 or

above) with the default IP address of the DPH-80 entered in the address box

(http://10.1.1.80).

The following page will appear.

Table of Contents