Table of Contents
Advertisement
3 Getting Started
After installation, DPH-70 is ready for configuration. You need to enter Internet Service Provider
(ISP) and Calling Card information to make and receive Internet phone calls. However, it can
make normal PSTN phone calls without any configuration. Refer to Appendix A to learn how to
enter alphanumeric and special characters required for user name and password.
Reminder: The DPH-70 identifies the end of each parameter by '#'. Please terminate each
parameter entry by pressing the '#' key. For example, to enter the password as '123' you need to
press '123#'.
3.1.1 ISP Information
The following Internet Service Provider (ISP) account information is required for dial-up Internet
connection. Refer to your Internet Service Provider's card for this information.
Internet Access Telephone Number
User Name
Password
To enter these parameters, follow the steps below. The DPH-70 voice menu will guide you
through the configuration process.
1. Enter '∗123∗#' to access the configuration menu.
2. Enter the configuration password. The default password is '12345'.
3. Enter '11', to edit the ISP parameters. You will hear: "Please enter the ISP phone number
and terminate by '#' button."
4. Enter the Internet access phone number and terminate by pressing '#' button. During
entry, the DPH-70 echoes the character pressed.
5. Terminate by pressing '#' button. You will hear the message: "You entered xxxx, press '1'
to accept, '2' to re-enter." Press the appropriate number to continue.
6. Follow the voice menu to enter your ISP User Name and password. After ISP
configuration, the phone will play the main menu.
7. Enter '5' to save the ISP information.
3.1.2 VoIP Calling Card Information
The following VoIP (Internet Telephone) calling card information is required for Internet phone
connection. Your VoIP service provider will provide these parameters. Refer to your calling card
for this information. After entering the calling card parameters, your Internet phone number will be
the same as user ID.
User ID
Password or PIN
To enter these parameters, follow the steps below and the voice menu from DPH-70.
1. Enter '∗123∗#' to enter the configuration menu.
2. Enter the configuration password. The default password is '12345'.
3. Enter '21', to edit the VoIP calling card parameters. The phone will prompt for calling card
configuration password.
4. Enter the password. If password entered is correct, it plays "Please enter the calling card
user ID and terminate by '#' button". Else, it plays "password entered is incorrect" and
returns to main menu.
5. Enter the calling card User ID and terminate by pressing '#' button. During entry, the
phone will echo the character pressed.
DPH-70 User's Guide
9
Advertisement
Table of Contents
