Table of Contents
Advertisement
Using H.323 Protocol
Configuration Main Page
Alias Name: This is the alias name for the H.323 phone. It will store any
alphanumeric character string up to 30 characters.
Fast Start: You can enable and disable the option for this mode.
Tunneling: You can enable and disable the option for this mode.
VAD: When this is enabled, the H.323 phone detects silence interval and
uses silence compression to save on bandwidth. This feature works irre-
spective of the codec selected.
Codec1, Codec2 and Codec3: This is a drop down menus that allows
the selection of what codec is to be used by phone. It also specifies the
priority of the codec. By default, codec1 will be given the highest priority.
Phone book: This is a table of 10 entries where the phone number, IP
address and port of the phone may be input. The first field is for the num-
ber to be dialed. This can be a maximum of 10-digits. It can contain char-
acters or an underscore and a hyphen. Next is the IP address of the
phone we want to dial to. It should be a valid IP address in dot-separated
form. Next is the port number at which the phone is running. It can be any
value in the range of 0-65535. See Section 13. For more details, refer to
the section titled SIP and H.323 Phonebook.
70
Advertisement
Table of Contents
