Table of Contents
Advertisement
Using H.323 Protocol
Using the H.323 Phone
If the H.323 phone is configured properly and if the support infrastructure is
there, the H.323 phone will play a dial tone on off-hook. You can dial any regis-
tered H.323 number by entering the number followed by '#' ('#' signals the end
of dialing to H.323 phone).
The D-Link H.323 phone works in 10, 100, and 10/100 Mbps Ethernet environ-
ments. It has an adjustable handset and speaker volume control and it plays a
tone for all numerical keys.
LEDs
Link/Activity: Steady on for link up, flashing for activity, off for link down.
Speaker LED (Red): indicates speaker on status.
Hold (Green): Steady on to indicate Hold status; off means normal.
Mute (Red): Steady on to indicate Mute status; off means normal
Tones
D-Link H.323 phone plays the following tones depending on the phone's cur-
rent state. The DPH-80 supports different types of tones for different countries
selected through configuration.
Dial tone
Call progress tone
Ring back tone
Busy tone
Call alert (ringing) tone
Error tone
DTMF tones for all numeric keys
.
79
Advertisement
Table of Contents
