Table of Contents
Advertisement
Getting Started
Configuring the IP Address
Click on Use the following IP address, and enter a value in the 10.1.1.xx
range. (Do not use the IP address 10.1.1.80; this address is already in
use by the DPH-80 as a default address.) Change your IP address on
your Ethernet adapter to 10.1.1.x, where x is something other than 80.
Make sure the subnet mask and default gateway match the DPH-80. This
should allow you to use the Web interface to configure the IP phone.
Click OK.
Open Internet Explorer. Click on Tools/Internet Options/Connections
Click on LAN Settings.
9
Advertisement
Table of Contents
