Configure Local Enable Password; Enable Admin - D-Link DGS-3200-16 - Switch - Stackable User Manual

xStack

Configure Local Enable Password

Users can configure the locally enabled password for Enable Admin. When a user chooses the "local_enable" method to promote
user level privileges to administrator privileges, he or she will be prompted to enter the password configured here that is locally
set on the Switch.
To view the following window, click Security > Access Authentication Control > Configure Local Enable Password:
To set the Local Enable Password, set the following parameters and click Apply.
Parameter
Old Local Enable
Password
New Local Enable
Password
Confirm Local Enable
Password
Click Apply to implement changes made.

Enable Admin

Users who have logged on to the Switch on the normal user level and wish to be promoted to the administrator level can use this
window. After logging on to the Switch, users will have only user level privileges. To gain access to administrator level privileges,
the user will open this window and will have to enter an authentication password. Possible authentication methods for this func-
tion include TACACS/XTACACS/TACACS+/RADIUS, user defined server groups, local enable (local account on the Switch),
or no authentication (none). Because XTACACS and TACACS do not support the enable function, the user must create a special
account on the server host, which has the username "enable", and a password configured by the administrator that will support the
"enable" function. This function becomes inoperable when the authentication policy is disabled.
To view the following window, click Security > Access Authentication Control > Enable Admin:
When this window appears, click the Enable Admin button revealing a window for the user to enter authentication (password,
username), as seen below. A successful entry will promote the user to Administrator level privileges on the Switch.
®
DGS-3200 Series Layer 2 Gigabit Ethernet Managed Switch
Figure 5 - 41. Configure Local Enable Password window
Description
If a password was previously configured for this entry, enter it here in order to change it to a
new password
Enter the new password that you wish to set on the Switch to authenticate users attempting
to access Administrator Level privileges on the Switch. The user may set a password of up to
15 characters.
Confirm the new password entered above. Entering a different password here from the one
set in the New Local Enabled field will result in a fail message.
Figure 5 - 42. Enable Admin window
131