Initial Set Up Instructions; Unpack The Cash Register; Clear Random Access Memory (Ram) And Initialize Cash Register - Sam4s ER-150II Operation Manual

INITIAL SET UP INSTRUCTIONS

The following instructions describe how to unpack and start
up the cash register.

UNPACK THE CASH REGISTER

1. Unpack and unwrap cash register.
2. Locate in the packing the following items.
* 1 roll of paper
* 1 rewind spindle (for journal tape)
CLEAR RANDOM ACCESS MEMORY (RAM) AND
INITIALIZE CASH REGISTER
1. Place mode switch in P position.
2. Connect the AC plug into a power outlet while
pressing the "C" and "00" keys.
3. Then, RAM is cleared and cash register prints the
symbol "........".
NOTE : This is a one time only procedure to be
performed after the battery is installed.
DO NOT CLEAR RAM ONCE THE CASH
REGISTER IS PROGRAMMED. TO DO SO
WOULD CAUSE ALL PROGRAMS AND
TOTALS TO BE LOST.
OFF R X Z P
1