Touchpanel Removal; Recommended Cleaning - Crestron Isys TPS-5000L Operation Manual

12 Inch Lectern/Wall Mounted Touchpanel
22 • 12 Inch Lectern/Wall Mount Touchpanel: Crestron Isys™ TPS-5000L
Cover Touchpanel with Faceplate
COVER
TOUCHPANEL
WITH BEZEL
NOTE:
WIRING NOT SHOWN
FOR CLARITY
DRYWALL
NOTE: If it is necessary to remove the touchpanel, secure and label the attached
cables before disconnecting them from the back of the touchpanel.

Touchpanel Removal

If it is necessary to remove the touchpanel after it has been installed into a mounting
surface, complete the following steps in the order provided to remove the
touchpanel. The only tool required is a #2 Phillips tip screwdriver.
1. Lift the plastic cover off the touchpanel. Do not apply excessive
pressure to the touchscreen.
2. Loosen and remove the screws that secure touchpanel to the mounting
option in use.
3. Using equal pressure, carefully remove the touchpanel from the
opening.
4. If necessary, secure and label the attached cables before disconnecting
them from the back of the touchpanel.

Recommended Cleaning

Keep the surface of the touchscreen free of dirt, dust, or other materials that could
degrade optical properties. Long-term contact with abrasive materials can scratch the
surface, which may degrade image quality.
For best cleaning results, use a clean, damp, non-abrasive cloth with any
commercially available non-ammonia glass cleaner. The faceplate may not provide a
complete watertight seal. Therefore, apply cleaning solution to the cloth rather than
the surface of the touchscreen. Wipe touchscreen clean and avoid ingress of moisture
beneath panels.
Crestron Isys™ TPS-5000L
Operations Guide - DOC. 5783A