Touchpanel Removal - Crestron Isys TPS-4000L Operation Manual

10.4" Lectern/Wall Mount Touchpanel
20 • 10.4 Inch Lectern/Wall Mount Touchpanel: Crestron Isys® TPS-4000L
Exploded View for Mounting the TPS-4000L in the Optional BB-4000L Back Box
TPS-4000L
Optional custom engraved keys can be ordered (Crestron part number DB12-BTN)
separately by using the Crestron Engraver Software. Version 2.2.1.2 or later is
available from the Downloads | Software Updates section of the Crestron website
(www.crestron.com).

Touchpanel Removal

If it is necessary to remove the touchpanel after it has been installed into a mounting
surface, complete the following steps in the order provided to remove the
touchpanel. The only tool required is a #1 Phillips tip screwdriver.
1. Lift the plastic cover off the touchpanel. Do not apply excessive
pressure to the touchscreen.
2. Remove the plastic buttons from the touchpanel. If the buttons are
engraved, be sure to record the button engraving with the button
location so that the buttons can be properly returned.
3. Loosen and remove the four screws that secure touchpanel to the
mounting option in use.
4. Using equal pressure, carefully remove the touchpanel from the
opening.
5. If necessary, secure and label the attached cables before disconnecting
them from the back of the touchpanel.
®
Crestron Isys TPS-4000L
1
#6-32 x 1 " (2007254)
2
PAN HEAD SCREW, QTY. 4
SUPPLIED BY CRESTRON
Operations Guide – DOC. 6301
BB-4000L