Crestron QM-FTDC Operation And Installation Manual page 37

Fliptop data center

Hide thumbs Also See for QM-FTDC:

Table of Contents

Crestron QM-FTDC

Operations & Installation Guide – DOC. 6312A

QM-FTDC Control Module

Within this module are three slots, Basic Controls, Microphone Controls, and

Buttons. Drag and drop the QM-FTDC module onto the C2Net-Device slot. This

symbol has default Net ID 1A.

C2Net-Device, Slot 5

Setting the Net ID in Device Settings

Double-click the QM-FTDC icon in the upper pane to open the "Device

Settings" window. This window displays QM-FTDC device information. The

Net ID can be changed in this window using the Net ID tab, as shown in the

following figure.

"Device Settings" Window

FlipTop Data Center

FlipTop Data Center: QM-FTDC • 33

Table of Contents