Crestron QM-FTDC Operation And Installation Manual page 53

Crestron QM-FTDC
Operations & Installation Guide – DOC. 6312A
To upgrade the firmware, complete the following steps.
NOTE: A firmware upgrade file has the extension .upg.
The following is the acceptable file extension for a firmware update file.
.upg QM-FTDC.V.XXXXX.upg
1. Make sure that "Communication Settings," which begins on page 43,
has been performed.
2. Open Crestron Toolbox.
3. Once communication is established, click Tools | System Info. The
Functions menu becomes available.
4. As shown after this step, select Functions | Firmware.
Functions Menu – Firmware Selection
5. The "Firmware" window displays the model and current firmware
version. Click Upload New Firmware.
"Firmware" Window
FlipTop Data Center
FlipTop Data Center: QM-FTDC • 49