Table of Contents
Advertisement
FlipTop Data Center
34 • FlipTop Data Center: QM-FTDC
NOTE: This procedure sets the Net ID for the QM-FTDC in the program only.
It does not automatically set the Net ID for the QM-FTDC itself. SIMPL
Windows automatically changes Net ID values of a device added to a program if
a duplicate device or a device with the same Net ID already exists in the
program. Always ensure that the hardware and software settings of the Net ID
match. For Net ID hardware setting details, refer to "Identity Code" on page 15.
Symbols in Programming Manager
Three symbols make up the QM-FTDC: Basic Controls, Microphone Controls,
and Buttons. These symbols may be opened in Detail View. Following each
symbol, a table lists the symbol input and output signals, respectively, and their
functional description.
Basic Controls
The Basic Controls module is built into slot 01 of the QM-FTDC.
The QM-FTDC provides one RGB video input labeled COMPUTER,
•
which accepts one computer or component video source.
The QM-FTDC provides one stereo line-level input labeled
•
COMPUTER AUDIO.
In addition to the stereo audio, the QM-FTDC provides two
•
microphone/line-level inputs.
The QM-FTDC provides one QM output that transmits the RGB or
•
component video together with the program audio and one or both
microphones via CresCAT-QM.
QM-FTDC Symbol – Detail View of Basic Controls
NOTE: Use an Analog Initialize to send a decimal input signal to the symbol.
QM-FTDC Basic Controls – Signal Descriptions
SIGNAL TYPE
AND NAME
Digital output:
< RGB Detect >
Digital output:
< YPbPr Detect >
Continued on the following page
Crestron QM-FTDC
DESCRIPTION
Indicates that TTL H-sync is detected on the COMPUTER
input. The feedback remains high for as long as video is
detected.
High/1 = Computer video detected; Low/0 = No video detected
Indicates that G/Y-sync is detected on the COMPUTER input.
The feedback remains high for as long as video is detected.
High/1 = Component video detected;
Low/0 = No video detected
Operations & Installation Guide - DOC. 6312A
Advertisement
Table of Contents
