Specifications - Crestron QM-FTDC Operation And Installation Manual

FlipTop Data Center
4 • FlipTop Data Center: QM-FTDC

Specifications

Specifications for the QM-FTDC are given in the following table.
QM-FTDC Specifications
SPECIFICATION
Cresnet Power Usage
Default Network IDs
Video Formats
Video Detection
Firmware
2-Series Control System
1,2
Update Files
Connectors
Computer Input
Computer Audio
Ethernet
Ethernet/Telecom
Communications
QuickMedia Output
Cresnet
Ground
Microphone
Operating Temperature
and Humidity
Dimensions and Weight
(Domestic Models)
Dimensions and Weight
(International Models)
Accessories
International Adaptors for
QMI-FTDC Models
1. The latest software versions can be obtained from the Crestron website. Refer to the NOTE
following these footnotes.
2. Crestron 2-Series control systems include the AV2 and PRO2. Consult the latest Crestron Product
Catalog for a complete list of 2-Series control systems.
Crestron QM-FTDC
DETAILS
8 Watts (0.33 Amp @ 24 VDC)
1A
RGBHV (VGA), RGsB, YP
Within 2 seconds
QM-FTDC.V.3.05.upg or later
Version 3.125.CUZ (for QM-RMCRX-BA) or later
(1) DB15HD female, video sensing on H-sync,
component video auto-detect
(1) 3.5mm mini-jack, computer soundcard type
(1) RJ-45 passthrough connector
(1) RJ-45 passthrough connector
(2) RJ-11 passthrough connectors
(1) RJ-45 CAT5E/CAT6
(2) 4-pin terminal blocks
(1) Ground Terminal
(2) 5-pin terminal blocks
41º to 104º F (5º to 40º C)
10 to 90% relative humidity
(non-condensing)
Width: 6.75 in (17.13 cm)
Height: 5.39 in (13.68 cm) with top closed
Depth: 5.71 in (14.49 cm)
Weight: 4.05 lbs (1.84 kg)
Width: 8.50 in (21.58 cm)
Height: 5.58 in (14.17 cm) with top closed
Depth: 6.67 in (16.95 cm)
Weight: 4.80 lbs (2.18 kg)
QM-FTCMK Cable Management Kit
QMI-FTCMK International Cable Management Kit
FT-BTNB-L Button Kit
FT-BTNB-L-BLANK Button Kit
FT-BTNB-S Button Kit
FT-BTNB-S-BLANK Button Kit
Refer to Appendix A on page 53
Operations & Installation Guide - DOC. 6312A
P
B R