Quickmedia Transport System - Crestron QM-FTDC Operation And Installation Manual

FlipTop Data Center Crestron QM-FTDC
®
This Cresnet device uses QuickMedia™ technology to facilitate an
uncomplicated connection of audio, video, and computer equipment. All media
and control signals are routed via a single QuickMedia cable for simple
installation. A complete integrated room solution is created with the addition of
a QuickMedia receiver (such as the QM-RMCRX-BA) and optional keypads or
touchpanels.
NOTE: The QM-FTDC is compatible with 2-Series control systems only.
QM-FTDC Block Diagram

QuickMedia Transport System

Using a new, proprietary signal routing solution, signals such as composite
video, S-video, RGBHV, audio, and microphone are all transported using a
single cable solution called QuickMedia (QM).
The QM transport system port is capable of managing computer, video, and
audio signals simultaneously through one CresCAT-QM cable, simplifying
installations.
Routing CresCAT-QM cable is less expensive and much simpler than routing
multi-colored, multi-conductor coax cable. All Crestron products using the QM
transport system are capable of sending and receiving QM signals via
CresCAT-QM cable. Installation of any QM device is as simple as installing one
set of QM wires from output to input. Installations are flexible, affordable, and
fast.
2 • FlipTop Data Center: QM-FTDC
Operations & Installation Guide - DOC. 6312A