Crestron QM-FTDC Operation And Installation Manual page 31

Crestron QM-FTDC
SystemBuilder – Equipment Room and Library
Operations & Installation Guide – DOC. 6312A
7. The QM-FTDC has three default programming modules already
prepared in SystemBuilder. When you choose the QM-FTDC, the
following notice is displayed. Click Yes to select one of the default
modules.
Default Programming Notice
Choosing Yes allows you to select one of the three default programming
selections.
Program and Speech – Dual Volume Control
•
Program and Speech – Single Volume Control
•
Program Only Volume Control
•
Click OK when finished.
FlipTop Data Center
FlipTop Data Center: QM-FTDC • 27