Crestron QM-FTDC Operation And Installation Manual page 13

Crestron QM-FTDC
125V – 50/60Hz 10A
Operations & Installation Guide – DOC. 6312A
COMPUTER
This female DB15HD connector is used for connecting a computer's RGB
video output to the presentation system. A corresponding 3.5mm mini-jack is
provided for the computer sound card output. This port can automatically
detect the presence of an H-sync video signal to support RGBHV and RGBS,
and component video detection by sensing the green video signal on pin 2 to
support RGsB and Y, P , P
B
connector pin-assignments.
75 Ω terminated (R,G,B)
•
Maximum input voltage 1 V
•
Maximum H and V Sync: 5.0 V
•
RGB DB15HD Pin Assignments
PIN FUNCTION
1 Red Video
2 Green Video
3 Blue Video
4 Reserved
5 Ground
6 Red Ground
7 Green Ground
8 Blue Ground
The computer audio connector provides an unbalanced stereo line-level audio
input (maximum input level 1 V
AC Outlet
The 3-prong grounded AC outlet is rated at 125 VAC @ 10 Amps, 50 – 60 Hz.
The international version (QMI-FTDC) has a bezel that accepts an adaptor
receptacle and three wires that connect to the adaptor; blue, brown, and green
with a yellow stripe.
The international AC outlet is rated 250 VAC @ 10 Amps, 50 – 60 Hz.
Refer to "Appendix A" on page 53 for a complete list of international
receptacles and applicable countries.
FlipTop Data Center
. Refer to the following table for the DB15HD
R
p-p
into 1 kΩ
p-p
PIN
9
10
11
12
13
14
15
).
RMS
FlipTop Data Center: QM-FTDC • 9
FUNCTION
No Connect
Ground
No Connect
Monitor Sense 1
Horizontal Sync
Vertical Sync
Monitor Sense 2