Configuring With Simpl Windows - Crestron QM-FTDC Operation And Installation Manual

Crestron QM-FTDC
Operations & Installation Guide – DOC. 6312A
SystemBuilder – "Set Network IDs" Window

Configuring with SIMPL Windows

NOTE: While SIMPL Windows can be used to configure the QM-FTDC,
Crestron recommends SystemBuilder software for configuring and tuning a
QuickMedia system.
NOTE: The following are acceptable file extensions for programs that include
a QM-RMCRX-BA and QM-FTDC, developed for specific control system
types:
.smw projectname.smw (source file)
.spz projectname.spz (compiled file for 2-Series)
.usp projectname.usp (source code module for SIMPL+)
.ir projectname.ir
.umc projectname.umc (user macro)
.ush projectname.ush (completed SIMPL+)
SIMPL Windows is the Crestron graphical, Windows
for programming control systems. The SIMPL Windows interface provides two
workspaces: the Configuration Manager, for configuring the control system,
touchpanels, and controlled network devices; and Program Manager, for
designing the logic and functionality of the control system.
In addition, you can use the powerful Crestron Toolbox utility to accomplish
multiple system tasks, such as uploading the program to the control system and
performing diagnostic functions. Together with the Crestron Database, these
tools provide you with the essential components you need to program the
QM-RMCRX-BA and QM-FTDC. Crestron software is available from the
Crestron website, registration is required for downloading.
NOTE: Crestron software and any files on the website are for Authorized
Crestron dealers and Crestron Authorized Independent Programmers (CAIP)
FlipTop Data Center
(user IR)
®
FlipTop Data Center: QM-FTDC • 31
-based development tool