The manufacturing process of the carbon parts often leaves micro-burrs and sharp edges. We recommend de-burring the edges to minimize the risks of electrical wire cuts, etc.
Very important in red line zone.
LEFT UPPER MAIN FRAME ASSEMBLY
Engine Spacer
Botton Head Cap
(H0678-S)
Screw M3x6mm
(HC094-S)
UP Main Frame Left
Flat Head Cap
(H1359-L)
Screw M2.5x5
(HC128-S)
RIGHT UPPER MAIN FRAME ASSEMBLY
Botton Head Cap
Screw M3x6mm
(HC094-S)
Nut Block
(H1386-S)
UP Main Frame Right
(H1359-R)
Box 3, Bag for page 8
Install here the 2 special NUT Block ( you can find in single bag )