Tail Pitch Slider - SAB Heli Division Goblin 700 Manual

TAIL GROUP ASSEMBLY
NOTE:
It is a normal for the tail to feel a bit tight after initial assembly as the tail
spindle preload is usually high when the helicopter is brand new. The preload
will loosen up after 2-5 flights allowing the system to become smooth.
eg: Microlube GL261
Note: Smaller ID
Socket Head Cap
Thrust Bearing
Screw M3x6mm
4x 9x4mm
(HC044-S)
(HC434-S)
Tail Blade Grip
(H1233-S)
Assembled
with bearing
Note: Larger ID
Spacer
Socket Head Cap
7x 9x0.5 Screw M2x6mm
(HC594-S) (HC004-S)
TAIL PITCH SLIDER ASSEMBLY
Socket Head Cap
Screw M2x6mm
(HC004-S)
Note: S >> Right Side
Oring 90 Shore
(HC594-S)
Spacer
4x 6.9x0.5mm
Spindle Shaft
(HC594-S) (H0220-S)
Bearing
4x 9x2.5mm
(HC403-S)
Assembled
Shim 4.1x 5.5x0.1mm
(HC594-S)
Uniball
M2.5x 5H6
(H0064-S)
Spacer
2x 3x3mm
(H0261-S)
Note: S >> Left Side
Tail Pitch Slider Link
(H0261-S)
Box 2, Bag for page 26
Tail Shaft
(H1313-S)
eg: Microlube GL261

TAIL PITCH SLIDER

ASSEMBLY
(H1249-S)
Page 26