SAB Heli Division Goblin 700 Manual page 44

Carbon Rod Support Tail Pulley 22T
[H1310-S] [H1312-22-S]
- 1 x Carbon Rod Support. - 1 x Tail Pulley 23T.
- 1 x Socket Screw M2.5x12. - 1 x Set Screw M3x6mm.
Top Case
[H1331-S]
- 1 x Main Case.
- 5 x Socket Screws M3x12mm.
- 1 x Bearing 2Rs 10x 24x7mm.
- 1 x Bearing 6x 13x5mm.
Main Pulley Front Tail Pulley
[H1335-S] [H1336-S]
- 1 x Main Pulley SET.
- 1 x Bushing. - 1 x Front Tail Pulley SET.
- 1 x Shim 12x 16x0.1mm. - 3 x Shim
Frame Spacer Tail Belt Ilder Mount
[H1340-S] [H1341-S]
- 1 x Tail Belt Ilder Mount.
- 2 x Socket Screw M3x12mm.
- 8 x Frame Spacer. - 2 x Shim
Canopy Spacer Boom Mount Support
[H1348-S] [H1350-S]
- 1 x Canopy Spacer. - 1 x Boom Mount Support.
- 2 x Flat Screws M2.5x8mm. - 4 x Finishing Washer M3.
- 2 x Nylon Nut M3. - 4 x Socket Screws M3x10.
Page 43
Tail Shaft
[H1313-S]
- 1 x Tail Shaft.
- 1 x Tail Hub.
- 2 x Oring.
Main Structure
[H1332-S]
- 1 x Main Structure.
- 2 x Pin 3x6.
- 1 x Bearing 10x
- 1 x Bearing 2RS 12x
Bearing Support
[H1337-S]
- 1 x Bearing Support.
- 1 xBearing 12x
- 4 x Socket Screw M3x8mm.
12x 16x0.1mm. - 4 x Flat Screw M2.5x5mm.
LOWER Main Frame
[H1344-S]
- 1 x LOWER Main Frame.
3x 6x0.5mm. - 1 x Green Sticker.
Bell Crank Base
[H1314-S]
- 1 x Bell Crank Base.
- 1 x Socket Screw M2.5x8mm.
22x6mm.
24x6.
Tank Column
[H1338-S]
21x5mm .
- 2 x Tank Column.
- 1 x Set Screw M3x20.
Tail Servo Mount
[H1353-S]
- 1 x Tail Servo Mount.
- 2 x Socket Screw M3x12mm.
SPARE PARTS
Main Shaft
[H1330-S]
- 1 x Main Shaft.
- 1 x Shoulder Screw M4x30.
- 1 x Bushing.
- 2 x Shim 10x 16x0.2mm.
Pinion Gear Bushing
[H1333-S] [H1334-S]
- 1 x Gear Bushing.
- 1 x Pinion. - 2 x Shim
- 2 x Shim 6x 9 x 0.2mm. - 1 x Washer
Carbon Tail Boom
[H1339-S]
- 1 x Carbon Tail Boom.
Black Battery Hatch
[H1347-S]
- 1 x Black Battery Hatch. - 2 x Soft Mousse.
- 2 x Tapping Screws M3x10mm. - 2 x Double Side Tape.
CF Low Side Frame Front
[H1358-S]
- 2 x Set Sticker.
- 2 x CF Low Side Frame Front.
10x 16x0.2mm.
10x 16x1mm.