SAB Heli Division Goblin 700 Manual page 22

Box 3, Bag for page 21
ENGINE ASSEMBLY
NOTE:
Do not add loctite
Socket Head Cap
on the engine shaft
Screws M3x10mm
(HC056-S)
CLUTCH UNIT
ASSEMBLY
Washer
( Supplied with The Engine )
NOTE:
Using Crank Clamp ( accessory not included in the kit )
you can easily tighten the assembly onto the engine shaft.
With a 6mm hex driver, you can tighten the clutch unit.
IMPORTANT:
First Tighten the clutch unit with a
hex tool against the engine bearing.
Only after this step, tighten the 2 M3x10 screws.
HEX 6mm
Clutch Unit
Page 21
10x 15x0.75mm
Socket Head Cap Screws M3x10mm
(HC056-S)
Washer Engine
ENGINE UNIT ASSEMBLY
MAIN RATIO
It is possible to have 5 ratios using the following Pulleys:
H0675BL-28-S
H0675BL-27-S
H0675BL-26-S
The KIT includes ratio :
ENGINE MOUNT ASSEMBLY
Engine
Socket Head Cap
Screw M4x15mm
(HC103-S)
Crank Clamp
52/28 7.7
52/27 8.0
52/26 8.3
52T-27T -> 8.0
ENGINE
ENGINE
MOUNTING
Engine Belt HTD3
309mm 13mm
(HC617-S)