Additional Components Required - SAB Heli Division Goblin 700 Manual

Raw nitro
Hide thumbs Also See for Goblin 700:
Table of Contents

Advertisement

NOTE FOR ASSEMBLY

ADDITIONAL COMPONENTS REQUIRED

*Engine: .90 to .105 Nitro Heli Engine.
*Muffer suited for the engine being used.
*Batteries: 2S/1800-2500mAh.
*Governor unit.
*1 flybarless 3 axis control unit
*Radio power system.
*1 throttle servo ( Mini Size ).
*3 cyclic servos ( Standard Size ).
*1 tail rotor servo ( Standard Size ).
*6 channel radio control system on 2.4 GHz
*Fuel.
NOTES FOR ASSEMBLY
Please refer to this manual for assembly instructions for this model. Follow the order of assembly
indicated. The instructions are divided into chapters, which are structured in a way that each step is
based on the work done in the previous step. Changing the order of assembly may result in additional
or unnecessary steps.Use thread lockers and retaining compounds as indicated. In general, each bolt
or screw that engages with a metal part requires thread lock. It is necessary to pay attention to the
symbols listed below:
Blue screw and blue bearing
in the illustration means you
Important
BOX xx, BAGxx
Indicates that for this
assembly phase you need
materials that are:
BOX xxx, BAG xxx.
TOOLS, LUBRICANTS, ADHESIVES
*Generic pliers.
*Hexagonal driver, size 1.5, 2, 2.5, 3mm.
*4/5mm T-Wrench.
*5.5mm Socket wrench (for M3 nuts).
*8mm Hex fork wrench (for M5 nuts).
*Medium threadlocker (SAB p/n HA116-S).
*Strong retaining compound (SAB p/n HA115-S).
*Spray lubricant (eg. Try-Flow Oil).
*Synthetic grease (eg. Microlube 261).
*Cyanoacrylate adhesive.
*Pitch Gauge (for set-up).
*Soldering equipment (for Engine wiring).
Green screw and Green bearing
in the illustration means you
need to use:
Thread Locker Medium
Use retaining compound
Strength
( SAB HA116-S)
( SAB HA115-S )
Use CA Glue
Use Proper Lubricant
need to use:
CANOPY
BLADE HOLDER
FAN CASE
TANK
INSIDE THE MAIN BOX THERE ARE:
Extra Card
Manual
The assembly process is described in the following chapters.
Each chapter provides you with the box, bag and/or foam
numbers you will need for that chapter. The information
is printed in a black box in the upper corner of the page.
BOX 2
BOX 1
BOX 3
BOX 4
Page 4

Advertisement

Table of Contents
loading

Table of Contents