Chapter 4 Setup
This chapter describes how to connect the emulator PC7501 with your host machine and emulation
probe M3xxxxTx-EPB. For details on how to install the emulator debugger M3TPDxxF, refer to
each user's manual (or Online Help) of them. This chapter also explains the emulator PC7501's
self-check and the procedure for setting up its interface. Before you run the self-check, you must
have the emulation probe.
IMPORTANT
Before making connections, be sure to turn OFF the power to the emulator PC7501 and the host
machine.
4.1 Connecting AC Adapter
The power is supplied from AC adapter to the emulator PC7501. Here following explains how to
connect the AC adapter.
Turn OFF the power to the PC7501.
Connect the DC cable of AC adapter to the PC7501.
Connect the AC power cable to the AC adapter.
Connect the AC power cable to the receptacle.
23 / 46