Table of Contents
Advertisement
PC7501 User's Manual
Chapter 4 Setup
This chapter describes how to connect the emulator PC7501 with your host machine and emulation probe
M3xxxxTx-EPB or R0ExxxxxxEPB00. For details on how to install the emulator debugger M3T-PDxxF, refer to each
user's manual (or Online Help) of them. This chapter also explains the emulator PC7501's self-check and the procedure
for setting up its interface. Before you run the self-check, you must have the emulation probe.
IMPORTANT
Before making connections, be sure to turn OFF the power to the emulator PC7501 and the host machine.
4.1 Connecting AC Adapter
The power is supplied from AC adapter to the emulator PC7501. Here following explains how to connect the AC
adapter.
Turn OFF the power to the PC7501.
Connect the DC cable of AC adapter to the PC7501.
Connect the AC power cable to the AC adapter.
Connect the AC power cable to the receptacle.
R20UT0207EJ0500 Rev.5.00
Nov 01, 2010
4. Setup
Page 25 of 50
Advertisement
Table of Contents
