Table of Contents
Advertisement
2. Copy
Basic Procedure
To make copies of originals, place them on the exposure glass or in the ADF.
When placing the original on the exposure glass, start with the first page to be copied. When placing
the original in the ADF, place them so that the first page is on the top.
About placing the original on the exposure glass, see page 191 "Placing an Original on the Exposure
Glass".
About placing the original in the ADF, see page 193 "Placing an Original in the Auto Document Feeder
(ADF)".
To copy onto paper other than plain paper, specify the paper type in Settings according to the type of
the paper you are using. For details, see page 316 "Changing Tray Paper Settings".
1.
Press the [Copier (Classic)] icon on the [Home] screen.
2.
Make sure that no previous settings remain.
When there are previous settings remaining, press [Reset].
3.
Select the paper tray containing the paper that is the same size and orientation as the
originals.
4.
Make sure that [Use Paper Tray Settg] is selected in [Original Size] under [Original
Settings].
[Use Paper Tray Settg] is not displayed if paper sizes are detected automatically.
When [Use Paper Tray Settg] is selected, the paper size and orientation of the tray you have
selected will appear in [Original Settng].
5.
Place the originals.
6.
Make desired settings.
7.
Enter the number of copies with the number keys.
The maximum copy quantity that can be entered is 999.
8.
Press [Start].
To stop the machine during a multi-copy run, press [Stop].
When placing the original on the exposure glass, press [ ] after all originals are scanned. Some
functions such as Batch mode may require that you press [ ] when placing originals in the ADF.
Follow the messages that appear on screen.
93
Advertisement
Table of Contents
