Fanning The Paper - Ricoh Pro C5300S Operator's Manual

Hide thumbs Also See for Pro C5300S:

Table of Contents

8. Paper Specifications and Adding Paper

• When loading paper of a size that is not automatically detected, specify the paper size in [Tray

Paper Settings].

page 238 "Specifying the Paper Size That Is Not Automatically Detected"

• Check the paper setting before printing. If the paper differs from the paper setting, a mismatch error

will occur when you print.

• Straighten curled or warped paper before loading.

• When loading paper on a tray which has a few sheets of paper, multiple sheets of paper may be

fed at once from the tray. Take out all sheets, fan the sheets, and then load them again.

• You may hear the sound of rubbing paper. This is not a malfunction.

• Do not stack paper over the limit mark.

Fanning the Paper

• If you load coated paper, label paper, transparencies, or thick paper of 150.1–360.0 g/m

(55.1 lb. Cover–198.0 lb. Index), it is important that you fan the sheets thoroughly. Misfeeds may

occur if paper is not fanned thoroughly. If the machine feeds several sheets of paper together or it

does not feed paper, fan paper and load it again.

Loosen the stack by riffling the sheets.