Web Image Monitor; Using Web Image Monitor - Ricoh Pro C5300S Operator's Manual

Hide thumbs Also See for Pro C5300S:

Table of Contents

7. Web Image Monitor

Web Image Monitor is a screen to confirm the machine status and settings on the computer.

When the machine and a computer can be connected to a network, you can access to Web Image

Monitor by entering the IP address of the machine on the address bar of the Web browser.

Accessing to Web Image Monitor

Enter the IP address of the machine in the address bar of the Web browser.

Example: when the IP address of the machine is "192.168.1.10"

• If SSL is specified

https://192.168.1.10/

• If SSL is not specified

http://192.168.1.10/

When you do not know whether SSL is specified on the machine, enter the address starting

with https. When you fail the connection, enter the address starting with http.

When entering the IPv4 address, do not enter "0" for each segment. If "192.168.001.010" is

entered, you cannot access the machine.

Confirming the machine status or settings on the top page of Web Image Monitor.

The machine status and remaining amount of consumables are displayed.