Table of Contents
Advertisement
Loading Tab Stock into the Two-tray Wide LCT
When loading tab stock, attach the tab fence.
1.
Check that paper in the paper tray is not being used, and then pull the tray carefully out
until it stops.
2.
Take out the tab fence from the pocket on the right-hand side of the paper tray.
3.
Adjust the side fences according to the size of the tab stock to be loaded, and then load
the tab stock.
Load the tab stocks with their side with the tabs facing the end fence.
D0CPIC1382
D0CPIC1392
Loading Paper into the Paper Tray
233
Advertisement
Table of Contents
