Finisher SR5110
• Open the finisher front
cover.
• Pull handle Rb18, and
then pull out staple
unit.
• Pull out the cartridge.
• Push the cartridge until it clicks.
• Return the staple unit to its original position.
• Close the finisher front cover.
• Turn knob Rb19
counterclockwise to
rotate the staple unit.
• Remove the empty refill
in the direction of the
arrow.
• Pull out the Waste
• Put the receptacle
Staple Receptacle,
then empty it.
• Push in the new
• Hold the green lever
cartridge until it clicks.
When a Staple Is Jammed
back.
and push in the
cartridge until it clicks,
then raise the lever.
D0CPIC1605
463