Table of Contents
Advertisement
1. Getting Started
If delivered to finisher shift tray 2
1.
Press the [Suspend / Resume] key of finisher shift tray 2.
1. [Suspend / Resume] key
2.
Remove the stack of paper from the finisher shift tray 2.
3.
Press the [Suspend / Resume] key to restart the print.
When Using the Z-fold Function
To use the Z-fold function, you must attach the Z-fold support tray.
Finisher SR5090/Booklet Finisher SR5100
• Finisher upper tray
1.
Remove the output paper.
2.
Attach the Z-fold support tray 2 to the finisher upper tray.
The back of the Z-fold support tray 2 is embossed with "2".
40
1 1
D0CPIC1764
D0CPIC1765
Advertisement
Table of Contents
