Table of Contents
Advertisement
8. Paper Specifications and Adding Paper
3.
Specify the paper settings.
page 289 "Overview of Paper Settings"
• Load paper with its printed side up (the front side).
• Load paper in the twin interposer in the same orientation as paper in the paper tray.
• The staple position or punch hole position will be on the left side of the paper, when you are facing
the machine.
• To load the paper in the twin interposer, align the orientation of originals in the ADF as shown
below.
Specifying the Paper Size That Is Not Automatically Detected
1.
Press [Tray Paper Settings] on the Home screen.
2.
Select the tray for which you want to change the paper size.
3.
Press [Manual Paper Settings].
238
D0CPIC1376
Twin interposer
ADF
Advertisement
Table of Contents
