11. Troubleshooting
When Printed Colors Appear Differently
When printed colors appear tinted or different from the colors in the original, execute [Auto Color
Calibration] to print the test pattern, and then scan the sheet on the exposure glass. The machine adjusts
the balance of each toner automatically.
Perform [Auto Color Calibration] in [Settings]
• The test pattern will be printed on an A4, 8
A3 or B4 JIS (Japanese Industrial Standard) will be used. Make sure to check the paper set into the
paper tray.
1.
Press [Settings] on the Home screen.
2.
Press [Maintenance]
3.
Press [Start Auto Calibration] of the function to perform adjustment, and print the test
pattern.
4.
Open the ADF.
5.
Place the printed test pattern on the exposure glass.
Align the arrow on the test pattern with the rear left corner on the exposure glass.
Place two or three blank sheets of white paper of the same size on the test pattern.
470
[Maintenance].
1
/
× 11 size page. If these sheets are not available,
2
[Auto Color Calibration].
D0C9PA5804