Configuring The Machine Using Utilities; Using Web Image Monitor - Ricoh MFSP213SFNW1 Manual

8. Configuring the Machine Using
Utilities

Using Web Image Monitor

• To operate the machine via Web Image Monitor, you must first configure the machine's
P
TCP/IP or wireless LAN settings. For details, see page 179 "Configuring the Network Settings".
• To operate the machine via Web Image Monitor, you must first configure the machine's
MF
TCP/IP or wireless LAN settings. For details, see page 155 "Network Settings" or see page 179
"Configuring the Network Settings".
• Some items might not appear, depending on the model type you are using.
• Some items can also be configured using the control panel.
Available operations
The following operations can be performed remotely using Web Image Monitor on a computer:
• Displaying the machine's status or settings
• Configuring the machine's settings
• Registering the scan and fax destinations
MF
• Configuring the network settings
• Configuring the IPsec settings
• Printing reports
• Setting the administrator password and e-mail address
MF
• Setting the administrator password
P
• Resetting the machine's configuration to the factory default
• Creating backup files of the machine's configuration
• Restoring the machine's configuration from backup files
• Configuring the machine's date and time
MF
• Configuring the machine's Energy Saver mode setting
MF
Supported Web browsers
• Internet Explorer 6 – 11
• Firefox 3.0 – 23
opal-p2_mf2_com_user_guide_00142131_eng.xml
165
Draft 2014/01/07