Shutting Down The Server - Fujitsu PRIMERGY GX2460 M1 Upgrade And Maintenance Manual

Basic hardware procedures
4.2

Shutting down the server

V
CAUTION!
For more information, see chapter
I
This step is only required when upgrading or replacing non-hot plug
components.
Ê Inform the system administrator that the server will be shut down and put
offline.
Ê Terminate all applications.
Ê Perform the required procedures described in the preliminary steps of each
upgrade or maintenance task.
Ê Shut down the server.
I
If the system is running an ACPI-compliant operating system,
pressing the On/Off button will perform a graceful shutdown.
Ê Switch on the ID indicator on the front panel and I/O panel of the server, see
section "Locating the defective server" on page
40 Upgrade and Maintenance Manual
"Important information" on page
39.
27.
GX2460 M1