Power supply unit (PSU)
6.1.1
PSU configurations
Figure 20: PSU bays
Input
200 - 240 V
6.1.2
Assembly rules
– Always install a dummy cover into an unused PSU bay to comply with
applicable EMC regulations and satisfy cooling requirements.
– Only use the allowed PSU configuration with two hot-plug PSUs (2200 W).
– For a redundant power supply configuration you need always two PSUs with
the same power class.
– Mixed assembly of PSUs from different power classes (e.g. class 1 or
class 2) within a system is not supported.
– Mixing of Platinum PSUs within same class and different manufacturer (e.g.
class 1) within a system is supported.
66
PSU 1
Output
2200 W
Upgrade and Maintenance Manual
PSU 2
PSU
80 PLUS Platinum
GX2460 M1