Removing The Cpu - Fujitsu PRIMERGY GX2460 M1 Upgrade And Maintenance Manual

11.2.3 Removing the CPU

Figure 125: Removing the screws
Ê Remove the three screws of the CPU frame in the order from 1 to 3.
Ê Clean residual thermal paste from the CPU and the heat sink surface using
a lint-free cloth and store the CPU in a save place.
V
CAUTION!
CPUs are extremely sensitive to electrostatic discharge and must be
handled with care. After a CPU has been removed from its protective
sleeve or from its socket, place it upside down on a non-conducting,
antistatic surface. Never push a CPU over a surface.
I
The carrier bracket will automatically eject after the captive screws are
being loosened.
GX2460 M1
Upgrade and Maintenance Manual
Processor (CPU)
175