Fujitsu PRIMERGY GX2460 M1 Upgrade And Maintenance Manual page 217

Figure 178: Installing the system board
Ê Push the system board in direction of the arrow to engage the bolts.
Ê Fasten the two thumb screws (see figure 175).
Ê Fasten the system board with the screw (see figure 175).
Ê For Japan / APAC / North America only:
Replace the CMOS battery installed on the new system board with a new
CMOS battery (see section
charging of CMOS battery might be reduced during stocked in warehouse.
Ê Remove the heat sink from the defective system board, see section
"Removing the heat sink" on page
Ê Remove the CPU from the defective system board, see section
the CPU" on page
Ê Remove the protective plastic cover from the CPU socket of the new system
board and fit it onto the socket of the defective system board which will be
sent back to spares.
I
Returned system boards without this cover probably have to be
scrapped.
Ê Install the CPU on the new system board, see section
on page 178.
GX2460 M1
"CMOS battery" on page
174.
175.
Upgrade and Maintenance Manual
System board and components
210), because
"Installing the CPU"
"Removing
217