Installing The Middle Riser Module; Connecting The Raid Card - Fujitsu PRIMERGY GX2460 M1 Upgrade And Maintenance Manual

9.3.1.4

Installing the middle riser module

Figure 77: Installing the middle riser module
Ê Install the riser module in the direction of the arrow.
Ê Fasten the three screws (see circles).
9.3.1.5

Connecting the RAID card

Figure 78: Remove the three fans
Ê Disconnect the power cable of the three fans from the HDD backplane (see
circles).
Ê Remove the three fans.
GX2460 M1
Upgrade and Maintenance Manual
Expansion cards and riser modules
125