Fujitsu PRIMERGY GX2460 M1 Upgrade And Maintenance Manual page 166

Main memory
Figure 119: Installing a memory module
Ê Align the notch on the bottom of the module with the crossbar in the slot.
Ê Press down on the memory module until the securing clips snap into the
cutouts at each end of the module.
Figure 120: Correct position of securing clips
I
To improve the contact of the memory module perform the following
steps:
Ê Eject the memory module again by pressing out the securing clips at
each end of the memory slot.
Ê Press down on the memory module until the securing clips snap into
the cutouts at each end of the module.
Ê Check if all securing clips are in the correct position (see figure 120).
166 Upgrade and Maintenance Manual
GX2460 M1