Expansion cards and riser modules
9.6
Handling SFP+ transceiver modules
A network adapter is equipped with one or two SFP+ (small form-factor
pluggable) transceiver modules. SFP+ transceiver modules are hot-pluggable.
9.6.1
Installing the SFP+ transceiver modules
Upgrade and Repair Unit
(URU)
Tools: tool-less
Preparing the SFP+ transceiver module
Figure 112: Removing the protective optical port plug
Ê Remove the SFP+ transceiver module from its protective packaging.
Ê Remove the optical port plug from the new/additional SFP+ transceiver
module.
V
CAUTION!
– Always keep the protective caps attached to the SFP+ transceiver
modules and fiber-optic cable connectors until you are ready to
make a connection.
– Keep the protective cap for future use.
154
Upgrade and Maintenance Manual
Hardware: 5 minutes
GX2460 M1